Publicité
What do the lights tell me?
The six lights show TrueSTEAM status and indicate when service needs to be performed.
Power (Green). On indicates the power cord is
plugged in.
Humidifying (Green).
Lit - TrueSTEAM is actively heating water and creating
steam.
Blinking - TrueSTEAM is resetting or filling. This is
usually done when plugging in the power cord, and
lasts for about 3 minutes. You can press the Go button
to reset TrueSTEAM immediately.
Dark - TrueSTEAM is in Ready mode - it can heat
water and produce steam when a humidity call comes
from the control.
Empty (Green). When on, the water tank is empty and
can be removed for manual cleaning.
Service (Red).
Blinking - The number of blinks (1-18) shows the type
of fault TrueSTEAM has detected. See "What should I
do if the Service light is blinking?" on page 22.
Draining
(Yellow).
Blinking - TrueSTEAM is flushing water from the tank
for manual cleaning. See "What is the automatic flush
cycle?" on page 15.
Cleaning
Required
(Yellow).
On - Indicates that the tank needs to be cleaned
manually. See "How do I clean the tank?" on page 16.
M29628
TrueSTEAM Humidification
System
69-2286EF--01
13
Publicité
