Before Initial Use
CAUTION!
■
Danger of suffocation! Keep children and animals away from the packaging mate-
rial.
1. Unpack all parts and check the items supplied for completeness (see the"Items Sup-
plied and Device Overview" chapter) and possible transport damage. If you fi nd any
damage to the components, do not use them (!), but contact our customer service
department.
2. Remove any protective fi lms and stickers that may be present from the device.
3. Clean the accessories before you fi rst use them as they may have possible produc-
tion residues on them. Follow the instructions in the "Cleaning and Storage" chapter
to do this.
Using Accessories Correctly
Blade Attachments
CAUTION!
■
Danger of injury due to sharp blades! Never grip a blade attachment (4, 9) by the
blades. Hold the plastic housing when you insert or remove an attachment.
■
The plastic housing of the blade attachments (4, 9) contains sealing rings. These
ensure that the shaker/soup mixing container (11, 12, 3) does not leak. Make sure
before each use that the sealing ring is correctly inserted in the groove!
■
Danger of damage to the blade attachment! Do not drop a blade attachment (4,
9) and do not leave it lying in water or other liquids for longer than two hours to avoid
damage.
The blade attachments (4, 9) are used to chop up, stir and blend the ingredients.
Attaching
1. Make sure that the sealing ring is correctly inserted in the groove!
2. Screw the blade attachment for soup mixing container (4) onto the soup mixing con-
tainer (3) and the blade attachment for shakers (9) onto one of the shakers (11, 12).
Check that it fi ts securely!
3. Place the blade attachment (4, 9) together with the soup mixing container/shaker (3,
11, 12) onto the motor unit (5). When you do this, make sure that the arrows marked
on the blade attachment (4, 9) and the motor unit (5) are above one another. Then
twist clockwise to secure.
Removing
Follow the steps for attaching in reverse order:
1. Twist the blade attachment (4, 9) together with the soup mixing container/shaker (3,
11, 12) anticlockwise and remove from the motor unit (5).
All manuals and user guides at all-guides.com
21
EN