Publicité
AUTOMATIC FAULT WARNINGS
FAULT CODE
E1
E3
E4
Ed
Ec
L4
C4
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water should be removed
before restarting the dishwasher.
If there is an error code that cannot be solved, please request professional assistance.
POSSIBLE FAULT
Longer water inlet time
Water not reaching required
temperature
Overflow
Failure of communication between
main circuit board and display circuit
board
Failure of the washing control system
Motor failure
Drain pump failure
WHAT TO DO
Make sure the water inlet tap is open
and water is flowing.
Separate the inlet hose from the tap
and clean the hose filter.
Contact service if the error continues.
Make sure the water pressure is not
too low for the appliance.
Contact service.
Unplug the machine and close the tap.
Contact service.
Contact service.
Contact service
Contact service
Contact service
53
Publicité
