Publicité
INSTALLATION
ADJUSTING THE HEIGHT
1) Keep the front feet at the minimum height before and
while positioning the dishwasher into the cabinet cutout.
2) Adjust the front foot level with a slot screwdriver to
stabilize the dishwasher and raise it to the enclosure
height.
3) Adjust the rear foot level with a Phillips screwdriver to
balance and raise the dishwasher to the enclosure
height.
The rear foot is located in the centre front at the base of the
appliance.
NOTE
Make sure the dishwasher is plumb and
note that the dishwasher can be placed
with
a
small
countertop.
The dishwasher must be level to ensure proper dish rack
operation and washing performance.
Place a spirit level on door and basket rail inside the tub, as
illustrated, to check that the dishwasher is level.
Level the dishwasher by adjusting the three levelling points
individually.
clearance
under
the
Fig. 14
a
b
a. Check level front to back.
b. Check level side to side.
CAUTION
When levelling the dishwasher, take care
not to tip it over.
NOTE
Turn the screwdriver clockwise to raise the
height, and turn it anticlockwise to lower the
height.
NOTE
The maximum adjustment height of the feet
is 50 mm.
UP
DOWN
Fig. 15
19
Publicité
