Publicité
INSTALLATION
CUTOUT DIMENSIONS
Cabinet depth shown includes kitchen cabinet front panel.
For a flush installation, a minimum inset depth of 580 mm
(22 13/16") is required with a custom door panel thickness
of 20 mm (3/4").
TOP VIEW
•
A 580 mm (22 13/16")
FRONT VIEW
•
B 600 mm (23 5/8")
A
B
SIDE VIEW
•
C 860 mm - 910 mm (33 7/8" - 35 13/16")
CUSTOM DOOR PANEL (FOR PANEL-READY
MODELS)
Fig. 2
The thickness of the custom panel may vary. A minimum
13 mm (1/2") thick panel is required, but the thickness can
be increased provided the panel does not exceed 11 kg
(24 lb). Minimum panel weight is 5 kg (11 lb). The custom
door panel template provided accommodates panels with
the dimensions specified below.
FRONT VIEW
Fig. 3
•
D 774 mm - 857 mm (30 1/2" - 33 3/4")
•
E 595 mm - 597 mm (23 7/16" - 23 1/2")
The height of a custom plith may vary depending on the
height of the cutout opening and door panel, but must be
within the following range:
0 mm - 80 mm (0" - 3 1/8")
If the dishwasher feet are raised, the plinth can be raised by
an additional 50 mm (2").
C
D
E
Fig. 4
Fig. 5
11
Publicité
