Publicité
USE
FILLING THE RINSE-AID AND SETTING
A
1) To fill the rinse-aid compartment, open the rinse-aid
compartment cap. (fig. A)
2) Fill the compartment with rinse-aid to the MAX level and
then close the cap. Be careful not to overfill the rinse-aid
compartment and wipe any spills.
3) Close the cap until it clicks.
In order to change the rinse-aid level, follow the steps
below:
1) Turn on the machine and press the Self-Cleaning button
for 5 seconds, then press the Delay button to enter
Menu settings: the Rinse Aid indicator will start flashing.
44
2) Change the rinse-aid level by pressing the Self-Cleaning
button, the setting will change in the following sequence:
D3→D4→D5→D6→D1→D2→D3. The higher the number, the
B
more rinse-aid the dishwasher will use.
The factory setting is "D3".
LEVEL
Fig. 59
1
2
3
4
5
3) Exit Menu settings by waiting 5 seconds or turn the
machine off.
NOTE
If the dishes are not drying properly or
are spotted, increase the level. If blue
stains form on your dishes, decrease the
level.
BRIGHTENER
DOSE
Rinse-aid not
dispensed
1 dose is
dispensed
2 doses are
dispensed
3 doses are
dispensed
4 doses are
dispensed
INDICATOR
D1 is shown on
the display.
D2 is shown on
the display.
D3 is shown on
the display.
D4 is shown on
the display.
D5 is shown on
the display.
Publicité
