Publicité
INSTALLATION
POSITIONING THE DISHWASHER
When positioning the machine, place it in an area where
dishes can be easily loaded and unloaded. Do not put the
machine in an area where the ambient temperature falls
below 0℃.
Read all warnings located on the packaging before
removing the packaging and positioning the machine.
Place the machine close to a water tap and drain. Take into
consideration that the connections will not be altered once
the machine is in position.
The dishwasher is equipped with water supply and drain
hoses that can be positioned either to the right or the left
sides to facilitate proper installation.
Leave an adequate distance around the machine to allow
ease of movement when cleaning.
CAUTION
Do not hold the machine by its door or
panel.
CAUTION
Ensure the water inlet and outlet hoses are
not squeezed or trapped and that the
machine does not stand on the electrical
cable while positioning.
Adjust the feet so the machine is level and balanced. The
machine should be placed on flat ground otherwise it will be
unstable and the door of the machine will not close
properly.
CAUTION
Please install the decorative panel as
indicated
Otherwise, the door may not open properly
and steam leakage problem may occur.
If the dishwasher is placed at the corner of the cabinet,
there should be some space when the door is opened.
If the dishwasher is placed next to a corner cabinet,
additional space should be left so that the door can be
opened.
12
on
the
assembly
a
b
a. Dishwasher.
b. Door of dishwasher.
c. Cabinet.
d. Minimum space of 50 mm.
NOTE
Depending on where your electrical outlet
is, you may need to cut a hole in the
opposite cabinet side.
sheet.
c
d
Fig. 6
Publicité
