Publicité
USE
WATER HARDNESS
Adjust the water hardness setting of your machine
according to the level specified on the test strip (if
available).
In order to change the water hardness level, follow the
steps below:
1) Turn on the machine and press the Program button for 5
seconds to enter water softener settings.
2) Press the Program button again to select the water
hardness level (e.g. H3)
LEVEL
H1
H2
H3
H4
H5
H6
*Every cycle with a regeneration operation consumes
additional 2,0 litres of water, the energy consumption
increases by 0.02 kWh and the program extents by
4 minutes.
GERMAN °DH
FRENCH °FH
0–5
6–11
12–17
18–22
23–34
35–55
3) Change the water hardness level by pressing the Delay
buttons, the setting will change in the following
sequence: H3→H4→H5→H6→H1→H2→H3
4) Press the Power button to save desired level: the newly
selected level will stop flashing
BRITISH °
CLARKE
0–9
0–6
10–20
7–14
21–30
15–21
31–40
22–28
41–60
29–42
61–98
43–69
WARNING
In order for the water softening system to
work properly, the dishwasher must be
filled with dishwasher salt before the first
wash. See instructions in the salt dispenser
chapter.
REGENERATION
OCCURS EVERY
X PROGRAM
SEQUENCE*
No regeneration
10
5
3
2
1
SALT
CONSUMP-
TION (GRAM/
CYCLE)
0
9
12
20
30
60
25
Publicité
