Publicité
INSTALLATION
STEAM PROTECTION FOIL
Steam will be released when the dishwasher door is
opened during operation of the dishwasher and after
completion of the working cycle. In order to prevent the
resulting steam from collecting and damaging the
underside of the countertop, use a steam protection foil
included in the plastic bag.
Clean the surface with a damp cloth before applying steam
protection to the underside of the countertop.
Apply the condensation strip under the countertop of the
cabinet. Ensure that the condensation strip is flush with the
edge of the countertop.
CAUTION
Steam protection foil must be applied
where the steam escapes when the door is
first opened. Failure to install the steam
protection foil during installation can
lead to damage to the cabinets and
countertop.
18
PLACEMENT OF DISHWASHER INTO THE OPENING
Now place the dishwasher into the opening and get ready
to connect all hoses and electrical connections.
1) Connect the inlet hose to the cold water supply.
2) Connect the drain hose.
3) Connect the power cord.
4) Place the dishwasher into the cabinet.
CAUTION
Fig. 11
Make sure that all hoses are pulled through
the side opening of the cabinet, that no
hoses are kinked and that all slack is taken
out as shown in the figure.
Fig. 12
Fig. 13
Publicité
