Publicité
INSTALLATION
ELECTRICAL REQUIREMENTS
Please check the electrical standards and local codes
before installing the appliance.
Connect to a properly rated, protected, and sized power
supply circuit to avoid electrical overload. The dishwasher
is designed for an electrical supply of 220-240 V (volt),
50 Hz (hertz), connected to a separate, properly-grounded
electrical circuit servicing only this appliance, with a fuse or
breakers rated for 10 amperes. Connect the product to a
grounded outlet protected by a fuse. The earthed plug of
the machine must be connected to an earthed outlet
supplied by suitable voltage and current.
If the mains voltage supply to your machine is 110 V,
connect a transformer of 110/220 V and 3000 W between
the electrical connection.
Never connect the ground wire to gas lines, or hot water
pipes, plumbing lines.
Do not use any extension cord or portable outlet device to
connect the dishwasher to a power supply.
These requirements must be met to prevent injury and
damage to the machine. Consult a qualified electrician if in
doubt.
E W
A
B
E W
•
A TOP VIEW
•
B FRONT VIEW
A properly-grounded, horizontally-mounted
electrical receptacle should be installed
E
according to this drawing.
Connections placement must be located on either side of
the cutout.
NOTE
The plug on this appliance may incorporate
13 A fuse depending on the target country
(e.g. UK, Saudi Arabia)
3 1/8"
(80)
E W
3 15/16"
100
E W
Fig. 7
13
Publicité
