Publicité
CROWN POSITIONS
Pusher 1
Pusher 2
A
To wind the movement: turn crown clockwise.
If the watch has stopped, approx. 30 turns of the crown will wind it.
B
Quick date setting.
Important : do not use quick corrector between 9 : 00 pm and 3 : 00 am ;
doing so may result in damage to the calendar mechanism.
C
Time setting and second time zone. When corrections and adjustments
are complete, push the crown to position A to guarantee full water-resis-
tance.
8
FIRST SETTING
When first setting the watch, synchronize the local and "Home Time" displays.
Pull the crown and pull it out to position C, then set the minute hand to 10 or 15.
•
If the hour hand and "Home Time" display show the same hour, you
need to ensure the hour hand and "Home Time" display agree as to
12/24 or am/pm, turn the crown forward, advancing the time until the
date changes. Make sure the "Home Time" display shows 24. If it shows
12, advance the hour hand by pressing either pusher 1 (+) or
pusher 2 (–), 12 times.
•
If the time displayed by the hands differs from the "Home
Time", depress the appropriate pusher, depending on whether local
time is ahead of home time, until both show the same time.
TIME SETTING
Pull crown out to Position C. The movement is then locked. To allow an accu-
rate setting, the second hand will stop (stop seconds Function). Make sure the
hands are properly showing either am or pm, otherwise the date will change at
noon instead of midnight. Turn the hands clockwise to the desired time. On the
hour signal, push the crown back to Position A. Only then the water-resistance
can be guaranteed.
SETTING OF A SECOND TIME ZONE
When hour hand and home time are synchronized, it is possible to display a
second time zone. Adjust hour hand back to correct local time using pusher
1 or 2.
Example: if you reside in Central Europe and your local time is 4:00 pm, the
second time zone set for New York should show 10:00 am.
9
Publicité
