Publicité
Refining algorithm
Automatic advance
1
Use the
keys to set [n FActor] (=n
factor) to between 1 (=30 minutes) and
6 (=180 minutes). Default n=2 (=60
minutes).
2
Press the
key to confi rm and move to
the next menu.
The parameter identifi es the
number of time spans (30 minutes
each) during which a manual
temperature change made in automatic
mode is kept constant.
For example, if n=3, the change is
active for 90 minutes.
1
Use the
keys to enable [On] or disable
[Off ] the automatic advance.
2
Press the
key to confi rm and move to
the next menu.
This function enables the device to
automatically adapt the system start-
up time in order to have the desired
temperature at the time set.
The advance is calculated according to
the diff erence between the temperature
detected and the one set.
Publicité
