Publicité
1
Use the
keys to set the program,
choosing from [P1], [P2], [P3] or [P4].
You can only access the submenu if
you select P4 (can be set by the user).
2
Press the
submenu to set the parameters below.
1
Use the
keys to set [t CyCLE] (=cycle
time) to between 5 and 40 minutes in
increments of 5 minutes.
2
Press the
key to confi rm and move to
the next parameter.
1
Use the
keys to set [t on] (=minimum
relay activation time) to between 1 and 5
minutes.
2
Press the
key to confi rm and move to
the next parameter.
1
Use the
keys to send the [bAnd]
(=proportional band) to between +1.0°C
and +3.0°C.
2
Press the
key to confi rm and move to
the next parameter.
key to access another
Publicité
