Publicité
Access the self-learning phase by pressing and holding the
than 3 seconds.
2
The
icon will fl ash once a second to indicate that learning has started.
3
Use the
keys to change the set temperature. The device saves all changes made.
4
The
key is disabled to prevent any accidental mode changes which would end
learning before it has fi nished.
The self-learning phase is exited automatically after a week.
To force exit, press and hold the
2
The
icon will no longer fl ash to indicate that learning has fi nished.
Once learning is complete, the programmable thermostat will adjust the temperature
according to the user profi le created.
Refi ning the thermal profi le
In automatic mode, the programmable thermostat registers any changes the
user makes to the temperature; it adapts the thermal profi le only where repeated
changes are made in the same time span over a period of two consecutive weeks.
1
keys together for more than 3 seconds.
Use the
temperature.
The change will be valid for a
limited time according to the [n FActor]
parameter set in the SETUP menu.
1
keys together for more
1
keys to change the set
Publicité
