Publicité
FUNCTIONAL DESCRIPTION
2
1
1. Hose coupling
2. Transport handle
3. Cord holder
4. Cord
5. Strainer
ASSEMBLY
Connecting a hose
Thread a 2" hose onto the coupling. Inspect hose
before operation and replace if worn. Position the
discharge end of the hose above the water surface.
Changing the coupling orientation
The coupling can be positioned vertically or slanted.
If the hose becomes bent or kinked, stop operation
and reposition the hose/coupling. Failure to route the
hose properly can reduce pump performance and
cause damage to the pump.
To change the orientation of the coupling:
1. Loosen the cap nuts.
2. Reposition the coupling as desired.
3. Tighten the cap nuts securely.
Portable Pump Power Base
The MILWAUKEE MX FUEL™ 1HP 2" Submersible
Pump (Cat. No. 49-50-1210) operation is controlled
by the MILWAUKEE Portable Pump Power Base
(Cat. No. MXF211).
1. WARNING! Remove battery to avoid starting the
machine.
3
2. To attach, align and press the pump and power
base cords together.
3. To remove, unscrew the coupler and pull apart.
4
5
Cat. No.
49-50-1210
4
Connecting to a
(Cat. No. MXF211)
Cat. No.
MXF211
Publicité
