WET/DRY OPERATION
This product is IPX 5 certified for use with water. Product can safely be used in the
shower and with water or gels.
TURBO SPEED
This trimmer is equipped with a turbo speed function for use on thick, dense hair.
To activate, press the "T" turbo button below the power button. To return to standard
speed, press the "T" Turbo button again.
USING THE ATTACHMENT COMBS
(Some trimmer kits do not have combs and sizes will vary by kit)
The trimmer comes with two adjustable combs: a hair clipper comb and a beard
comb. To attach a comb, place the bottom edge of the comb into the slot on the
trimmer and push down until comb snaps into place (Figure B).
To adjust the trim lengths, turn the adjustment wheel on the side of the trimmer to
the desired setting. The trim length will appear in the trim length indicator; the top
number indicates length using beard comb; the bottom number indicates length
using hair comb (Figure C).
To remove the comb, hold the trimmer with the blade facing away from you. Firmly
push the bottom of the comb upward and away from the blade.
Hair Clipper Comb
Beard Comb
TRAVEL LOCK FEATURE
This product is equipped with a travel lock feature. To enable the travel lock, press
and hold the power button for 3 seconds until you see the red lock symbol appear on
the digital display. To release the travel lock, press and hold the power button for
3 seconds until the red lock symbol disappears.
USER MAINTENANCE
The internal mechanism of your trimmer has been permanently lubricated by the
factory. Other than the recommended maintenance described in this manual, no
other maintenance should be performed, except by Andis Company, or an Andis
authorized service station. To contact Andis directly, please call our Customer
Support Team at 1-800-558-9441 or email us at support@andisco.com.
6
ATTACHMENT COMB LENGTHS
Adjusts 20 settings from 3mm up to 12.5mm
Adjusts 20 settings from 0.5mm up to 10mm