Publicité
All manuals and user guides at all-guides.com
The mainboard provides 2 slots for 184-pin DDR1 DIMM (Double In-Line Memory
Module) modules and 2 slots for 240-pin DDR2 DIMM, which supports the memory
size up to 2GB.
Since DDR2 modules are not interchangeable with DDR1 and the DDR2 stand-
ard is not backward compatible, you should always install DDR2 memory module in
DDR2 slot (DIMM1 & DIMM3), and DDR1 memory module in DDR1 slot (DIMM2 & DIMM4).
Wrong installation may cause damage of mainboard. Meanwhile, you are not able to
boot up your system if you install DDR1 & DDR2 memory modules simultaneously.
For the updated supporting memory modules, please visit http://www.msi.
com.tw/program/products/mainboard/mbd/pro_mbd_trp_list.php.
Introduction to DDR2 & DDR1 SDRAM
DDR2 is a new technology of memory module, and its speed is the top limit of
current DDR1 technology. DDR2 uses a 1.8V supply for core and I/O voltage, com-
pared to 2.5V for DDR1, and requires 28% less power than DDR1 chips. DDR2 truly
is the future of memory, but will require some changes as the technology is not
backwardly compatible and only motherboards specifically designed for DDR2 memory
will be able to support these chips.
DDR2 incorporates new features at the chip level that give it better signal
integrity, thereby enabling higher clock speeds.
DDR2 modules have 240 pins, versus 184 pins on a DDR1 module, and the
length of DDR2 module is 5.25". DDR2 modules have smaller and tighter spaced pins.
The height of DDR2 modules varies, but they will typically be less than 1.3" in height.
DDR1 SDRAM is similar to conventional SDRAM, but doubles the rate by
transferring data twice per cycle. It uses 2.5 volts, and requires 184-pin DIMM modules.
Memory
DIMM1~DIMM4
(from left to right)
DIMM1 & DIMM3 are for DDR2 memory module
DIMM2 & DIMM4 are for DDR1 memory module
Hardware Setup
E2-7
Publicité
