Publicité
All manuals and user guides at all-guides.com
[Disabled]
Disable Dynamic Overclocking function.
[Private]
1st level of overclocking, increasing the CPU frequency by 1%.
[Sergeant]
2nd level of overclocking, increasing the CPU frequency by 3%.
[Captain]
3rd level of overclocking, increasing the CPU frequency by 5%.
[Colonel]
4th level of overclocking, increasing the CPU frequency by 7%.
[General]
5th level of overclocking, increasing the CPU frequency by 10%.
(for 915P only)
[Commander]
6th level of overclocking, increasing the CPU frequency by 15%.
(for 915P only)
MSI Reminds You...
1. Even though the Dynamic Overclocking Technology is more stable
than manual overclocking, basically, it is still risky. We suggest
user to make sure that your CPU can afford to overclock regularly
first. If you find the PC appears to be unstable or reboot
incidentally, it's better to disable the Dynamic Overclocking or to
lower the level of overclocking options. By the way, if you need to
conduct overclocking manually, you also need to disable the Dy-
namic OverClocking first.
2. Meanwhile, there are two functions to protect user's system from
crashing.
- There is a safe key "Ins" in BIOS. In case the overclocking
fails, you can press "Ins" key while system rebooting to
restore to the BIOS defaults.
- If the system incidentally reboot for four times, the BIOS will
also be restored to the defaults.
Adjust CPU FSB Frequency
This item allows you to select the CPU Front Side Bus clock frequency (in MHz) and
overclock the processor by adjusting the FSB clock to a higher frequency. Setting
options:
For CPU FSB200: [200]~[500]
For CPU FSB133: [133]~[500]
CPU Ratio CMOS Setting
This item allows you to adjust the CPU ratio. Setting to [Startup] enables the CPU
running at the fastest speed which is detected by system.
Adjusted CPU Clock
This read-only item shows the CPU Clock you like to use, which will automatically
change in accordance with the settings of Adjust CPU FSB Frequency and CPU
Ratio CMOS Setting. Please note you must reboot the system to let the change
take effect.
Adjust DDR Memory Frequency
When it is set to [Manual] in High Performance Mode, user can place an artificial
memory clock limit on the system. Please note that memory is prevented from running
faster than this frequency. Setting options:
For DDR1: [Auto], [333], [400].
For DDR2: [Auto], [400], [533].
BIOS Setup
E3-11
Publicité
