Publicité
INNER LIGHT OPTION
The door must be at OPEN position during activation and deactivation of inner light modes.
How to change from "ECO MODE" to "NORMAL MODE" for Inner Light option :
*
First open the dishwasher door and energize the machine via main switch (if it is in OFF position).
*
Press ''Tablet'' and ''Prewash'' buttons simultaneously for 3 seconds.
*
"IL0" will be shown in the digit display for 2 seconds to show the "Normal Mode" is selected for inner light option.
*
After "Normal Mode" is selected, the inner light will be ON as long as the machine is energized and machine door is open.
How to change from "NORMAL MODE" to "ECO MODE" for Inner Light option :
*
First open the dishwasher door and energize the machine via main switch (if it is in OFF position).
*
Press ''Tablet'' and ''Prewash'' buttons simultaneously for 3 seconds.
*
"IL1" will be shown in the digit display for 2 seconds to show the "Eco Mode" is selected for inner light option
Also inner light turns OFF and ON again (blinks momentarily) to show this selection is activated.
*
After "Eco Mode" is selected, the inner light will be ON for 4min after machine door is opened and then turns OFF.
If any user intervention occurs such as pressing buttons, Eco Mode cycle starts from beginning (inner light is ON for 4min and then
becomes OFF again)
Note: Factory setting for inner light are set to ''IL1''.
Publicité
