Publicité
SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME
Switching on the machine
Machine is energized when the On/Off button is
pressed , two dashes appear in the program display
and the end of program indicator turns on.
1.
Press the Power On/Off key.
2.
Select the program suiting your dishes via the Program Selection button.
3.
If you prefer or wish to prefer , you can choose additional function.
4.
Close door.The program starts automatically.
Note:If you decide not to start to machine after selecting the program , just press the on/off
button.Your machine will become ready for the new program selection when you press on/off
button again.You can select the new program by pressing the program selection button.
Program follow-up
Do not open the door before the
program ends.
Changing a programme
If you would like to change programs while a washing program is continuing.
Note:When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.
When you select a program with the
program selection button,the program
you select ( P1,P2,etc )appears on the
program display and the end of program
indicator turns off.
Open the door and select a new
program by pressing the
program selection button.
End of program indicator on the control panel
turns on when the selected washing program is
completed .Your machine also gives a buzzer
sound for "5 times" when the program is
completed.
After closing the door , the
new program started will
resume the course of the old
program.
25
Publicité
