Fermax VDS-BUS2 Manuel page 30

VDS - B VDS - B VDS - B VDS - B US2 US2 US2 US2
VDS - B VDS - BUS2 VDS - B VDS - B VDS - BUS2 VDS - B US2 US2 US2 US2
(tB) B time
Reset system
Pag 30
All manuals and user guides at all-guides.com
'B time' defines electric lock activation activation from the panel:
by pressing the open button (indoor).
Allowed values are defined between 1 and 99 seconds.
Confirm entered value pressing 'B' key.
Finally, system ends sequence asking for a hardware reset to
enable new parameters. Turn off the power to end sequence.
After re-powering up the system, the display will notice the
synchronization process with the amplifier (device that makes
electric lock activations): 'Sending..."