Manufacturer's Warranty; Spare Parts Lists - REMS Python Notice D'utilisation

eng
5.3. Fault: No useful bend.
Cause:
● Pipe size does not correspond to the bending former (10) and/or the rollers/
back formers (7).
● Rollers (7) in wrong position between roller holders (1 and 2)
(REMS Python).
● Back former support (3) fi tted incorrectly (REMS Swing,
REMS Hydro-Swing).
● Pipe is unsuitable for bending.
5.4. Fault: Advance lever (11) cannot be pushed or only with diffi culty (REMS Swing).
Cause:
● Pipe is unsuitable for bending.
● One-hand pipe bender defective.
6. Disposal
REMS Python, REMS Swing, REMS Hydro-Swing may not be thrown in the
domestic waste when no longer used. They must be disposed of properly by
law.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the
fi rst user. The date of delivery shall be documented by the submission of the
original purchase documents, which must include the date of purchase and the
designation of the product. All functional defects occurring within the warranty
period, which are clearly the consequence of defects in production or materials,
will be remedied free of charge. The remedy of defects shall not extend or
renew the warranty period for the product. Damage attributable to natural wear
and tear, incorrect treatment or misuse, failure to observe the operational
instructions, unsuitable operating materials, excessive demand, use for unau-
thorized purposes, interventions by the customer or a third party or other
reasons, for which REMS is not responsible, shall be excluded from the warranty.
Services under the warranty may only be provided by customer service stations
authorized for this purpose by REMS. Complaints will only be accepted if the
product is returned to a customer service station authorized by REMS without
prior interference and in a fully assembled condition. Replaced products and
parts shall become the property of REMS.
Remedy:
● Use bending formers and/or rollers/back formers according to the pipe size.
● Insert rollers according to the pipe size, see scale (17), into the holes
between the roller holders (1 and 2).
● Fit back former support as described in 2.2. or 2.3.
● Only use approved pipes.
Remedy:
● Only use approved pipes.
● Have the one-hand pipe bender checked/repaired by an authorised REMS
customer service workshop.
The user shall be responsible for the cost of shipping and returning the product.
A list of the REMS-authorized customer service stations is available on the
Internet under www.rems.de. For countries which are not listed, the product
must be sent to the SERVICE-CENTER, Neue Rommelshauser Strasse 4,
71332 Waiblingen, Deutschland. The legal rights of the user, in particular the
right to make claims against the seller in case of defects as well as claims due
to wilful violation of obligations and claims under the product liability law are
not restricted by this warranty.
This warranty is subject to German law with the exclusion of the confl ict of laws
rules of German International Private Law as well as with the exclusion of the
United Nations Convention on Contracts for the International Sales of Goods
(CISG). Warrantor of this world-wide valid manufacturer's warranty is REMS
GmbH & Co KG, Stuttgarter Str. 83, 71332 Waiblingen, Deutschland.

8. Spare parts lists

For spare parts lists, see www.rems.de → Downloads → Parts lists.
eng
11