Publicité
STEP 2: ASSEMBLY MODE
As illustrated in the accompanying figure:
1. Lift the bending part of the frame upward, insert the two connecting tube groups on the left and right as
shown in the figure, and secure them tightly with a total of 8 screws A-M8*14.
2. Stand the machine up at the back end of the main frame manually.
STEP 3: ATTACHING THE ARMREST
Raise the armrest of the instrument panel as depicted in the image below. Secure both sides to the left
and right columns with M8*14 screws and arc pads.
ENGLISH
6.
Publicité
