Publicité
Should you need technical assistance or advise with the installation of pieces, visit our website www.isefit.com,
where you will find the section CUSTOMER CARE.
TO HELP US ASSIST YOU, PLEASE BE PREPARED TO PROVIDE THE FOLLOWING INFORMATION WHEN
CONTACTING US. Look for the identification label that will be attached to your machine. Take photos/videos.
MODEL NUMBER (REFERENCE) + SERIAL NUMBER
1
2 THE KEY NUMBER AND DESCRIPTION OF THE
REPLACEMENT PART(S)
(SEE THE PART LIST AND THE EXPLODED
DRAWING)
YOU MUST KEEP THE PURCHASE RECEIPT IN
3
ORDER TO HAVE ACCESS TO THIS SERVICE
CODE
FAULT DESCRIPTION
E01
Communication Blocked
Between Electronic and
Controller.
E02
The controller does not detect
the voltage of the motor line.
E03
When the motor is running, the
controller can't test the speed
signal.
When the motor is running,
E05
current exceeds the rated
current.
E07
Monitor can't test the safety of
security lock.
ENGLISH
15.
MODEL NO.: XXXXX
SERIAL Nº.: 206532020101750001
FAULT TREATMENT
• When the communication line is blocked: Please reconnect or change the
communication line.
• When the electronic unit receives no signal: Change the electronic unit to repair.
• When the controller receives no signal: Change the controller to repair.
• If the motor cable is not connected: Check the connection.
• If there is no voltage output or if it's abnormal: Change the controller to repair.
• If the motor is faulty: Replace the motor.
• If the motor cable is not connected: Check the connection.
• If the controller is receiving an abnormal signal: Change the controller to repair.
• Treadmill motor load Readjust the within the exceeds the rated current rated
current of the motor.
• Treadmill motor assembly Check the structure of structure problems, causing the
treadmill the motor blocked or resistance.
• By limiting control system Change under controller to failure repair.
• Safety Magnet off Please set magnet safety lock correctly.
• Electronic Safety lock system Change electronic to repair malfunction.
7. CUSTOMER CARE
8. GENERAL FAILURES
Publicité
