Publicité
HIBERNATION MODE
When the treadmill stops running without any operation for more than
10 minutes, it enters into hibernation mode. The display will
automatically turn off. To wake the treadmill from this mode, press any
key to resume the standby mode with the initial full display.
SAFETY LOCK FUNCTION:
Insert the security key into the console slot to
activate the treadmill. When you do this, you will
hear an acoustic sound confirming the unlocking
and the treadmill will be ready for use.
The safety key of a treadmill has a very important
function for the safety of the user.
Attached to the user with a clip, it is designed to
immediately stop the treadmill if the user falls or moves
too far from the control panel. This helps prevent serious
injuries in the event of falls or imbalances.
If the user needs to stop the treadmill suddenly for any
reason, pulling the safety key ensures an immediate stop
of the machine.
After using the treadmill, you must specify the location of the safety lock in the electronic form before the
treadmill can be operated again. To activate the safety lock, engage it until the E07 LCD window displays "--,"
accompanied by a beep every second as a warning. If the safety lock is disengaged while the treadmill is in
use, the system will immediately stop, re-engage the safety lock, and all motion data will be cleared.
SPECIFICATIONS FOR NUMERICAL DISPLAY SETTINGS AND RANGES
TIME (MIN:SEC)
SPEED (KM/H)
DISTANCE (KM)
PULSE (SEC/MIN)
CALORIES (KCAL)
ENGLISH
10.
SET INITIAL
INITIAL
VALUE
0:00
10:00
0.0
N/A
0.0
1.0
P
N/A
0
50
10 MINUTES
SECURITY LOCK
"SECURITY KEY"
SETTING
DISPLAY
RANGE
RANGE
5:00-45:00
0:00-45:00
N/A
1.0-12.8
1.0-99.0
0.0-99.9
72
72-199
20-990
0-999
Publicité
