Publicité
and trouble on the tool.
6.
Do not leave the tool running. Operate the tool
only when hand-held.
7.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
8.
Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9.
Avoid cutting electrical wires. It can cause
serious accident by electric shock.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
Symbols
The followings show the symbols used for tool.
･
volts
･
amperes
･
hertz
･
alternating current
･
no load speed
･
Class II Construction
･
revolutions or reciprocation per minute
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
Switch action
004671
USD201-2
004672
CAUTION:
Before plugging in the tool, always check to see that
•
the switch lever (paddle switch) actuates properly
and returns to the ''OFF'' position when released.
The switch lever does not actuate when the lock-off
•
lever is in the LOCK position. Do not try to actuate
the switch lever when the lock-off lever is in the
LOCK position.
When not operating the tool, keep the lock-off lever
•
in the LOCK position.
To prevent the switch from being accidentally actuated, a
lock-off lever is provided. To start the tool, turn the
lock-off lever to the FREE position and then squeeze the
switch lever. Release the switch lever to stop.
Permissible shearing thickness
1
2
004674
4
1. Lock-off lever in
1
2. Switch lever
2
1. Lock-off lever in
1
1. Gauge for
2. Gauge for mild
the FREE
position
(Paddle switch)
the LOCK
position
stainless: 1.2
mm (3/64")
steel: 1.6 mm
(1/16")
Publicité
