Publicité
Moisture build-up in the
appliance
Doors do not open or
close properly
Abnormal noises
Food is not cold enough
The unit is cooling too
much
Some noises may be heard during normal appliance operation (compressor
operating cycle, automatic defrosting, circulation of the refrigerating gas
through the appliance, etc.).
Packages are wet
before being placed
in the appliance
Refrigerator doors
are opened
frequently
Food is preventing
the doors from
closing
Compartments,
shelves or drawers
are not perfectly in
place
Door seals are
broken or bent
The appliance is not
level
The appliance is not
level
The appliance is
touching the wall or
other objects
A component, e.g. a
pipe, on the back of
the appliance is
touching another part
of the unit or the wall
The temperature is
not set correctly
The door has been
left open for a long
time
A large amount of
warm food has been
placed in the
appliance in the last
24 hours
The appliance is near
a heat source
Thermostat is set too
high
Packages must be dry before being
placed in the appliance
Limit the opening of doors so that
moisture from the room does not
enter the appliance
Rearrange the inside of the
appliance
Put them correctly in place
Check the seals, replace them if
necessary
Check if the appliance or the
cabinet is level, adjust if necessary
Adjust the cabinet if it is not level
Move the appliance slightly
If necessary, bend the component
carefully to clear the space
Please refer to the temperature
setting section
Open the door only when
necessary
Temporarily set the thermostat to a
higher setting to cool the appliance
Please refer to the installation
location section
Temporarily set the thermostat to a
lower position
Publicité
