Publicité
E10
Fridge
compartment
is not cold
enough
E11
Fridge
compartment
is too cold
The appliance does not
work
The appliance does not
work well
Likely to occur after:
- Long term power
failure.
- Hot food has been
left in the fridge.
Various
The appliance is
switched off
The fuse has blown
The plug is
unplugged
The plug is defective
The appliance is
overloaded
The doors are not
closed properly
There is not enough
space at the back
and on the sides of
the appliance
If this warning continues an
authorized technician needs to be
contacted.
1. Set the fridge temperature to a
colder value or set Super cool. This
should remove the error code once
the required temperature has been
reached. Keep doors closed to
improve time taken to reach the
correct temperature.
2. Please empty the location at the
front area of air duct channel holes
and avoid putting food close to the
sensor.
If this warning continues, an
authorised technician needs to be
contacted.
1. Check if Super cool mode is
activated
2. Reduce the fridge compartment
temperature
3. Check if vents are clear and not
clogged
If this warning continues, an
authorised technician needs to be
contacted.
Switch on the appliance
Check the fuse, replace it if
necessary.
Connect the plug.
Electrical malfunctions must be
corrected by an electrician.
Limit the storage of your food in the
appliance
Rearrange the inside of the
appliance
Move your appliance to reach the
required space
Publicité
