Publicité
66
1.0
SAFETY SYMBOLS AND WARNINGS
2.0
SAFETY ISSUES
2.1
GENERAL SAFETY RULES
3.0
FURNACE OPERATION INFORMATION
UM
3.1
STARTING THE FURNACE
3.2
SHUTTING DOWN THE FURNACE
3.3
OPERATING TIPS
4.0
ROUTINE MAINTENANCE BY HOMEOWNER
4.1
AIR FILTER
4.2
ROUTINE EXAMINATION
4.3
ANNUAL INSPECTION/SERVICE
4.4
FURNACE APPEARANCE
4.5
SEQUENCE OF OPERATION - ECM EON
4.6
VARIATIONS
4.7
TERMINATIONS
5.0
HOMEOWNER'S REFERENCE
IMPORTANT:
Read these instructions thoroughly before
attempting to operate this furnace.
ATTENTION:
TO REMOVE OUTER STAINLESS STEEL DOOR, FIRMLY GRAB DOOR SIDES AT THE TOP AND
PULL OUT FROM CLIPS. PULL UPWARDS FROM BRACKETS IN BASE PANEL.
TO REPLACE OUTER STAINLESS STEEL DOOR, ALIGN BRACKETS AT BOTTOM OF DOOR INTO
SLOTS ON FURNACE BASE PANEL AND SECURE. ALIGN MALE CLIPS ON THE TOP OF THE
DOOR TO THE FEMALE CLIPS ON THE FURNACE CABINET AND PUSH INTO PLACE.
W415-2306 / C / 09.22.20
TABLE OF CONTENTS
Please read carefully and keep in a safe place
for future reference by a service technician.
DO NOT DESTROY THIS MANUAL
H1.21.1A
67
68
70
72
72
73
73
74
74
74
75
75
76
76
76
77
Publicité
