Bosch GWS 19-125 CI Professional Notice Originale page 23

stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used (see "Operation", page 27).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) On/off switch
(4) Speed preselection thumbwheel
(GWS 19-125 CIE)
(5) Standard auxiliary handle (insulated gripping sur-
a)
face)
(6) Vibration-damping auxiliary handle (insulated grip-
ping surface)
(7) Protective guard for cutting
(8) Protective guard for grinding
(9) Extraction guard for grinding
(10) Mounting flange with O‑ring
Technical Data
Angle grinder
Article number
Rated power input
Power output
A)
Rated no-load speed
Speed adjustment range
Max. grinding disc diameter/
rubber sanding pad diameter
Grinding spindle thread
Max. thread length of grinding
spindle
Speed preselection
Constant electronic control
Restart protection
Soft start
KickBack Control
B)
Weight
Protection class
A) Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed
must not exceed the rated no-load speed and is therefore lower.
B) Depends on protective guard ((7), (8), (27)) and auxiliary handle ((5), (6)) in use
Bosch Power Tools
(11) Carbide grinding head
(12) Grinding disc
(13) Cutting disc
(14) Quick-clamping nut
(15) Clamping nut
(16) Two-pin spanner for clamping nut
(17) Grinding spindle
(18) Handle (insulated gripping surface)
(19) Extraction guard for cutting with cutting guides
(20) Diamond cutting disc
(21) Hand guard
(22) Cup brush
(23) Rubber sanding pad
(24) Abrasive disc
(25) Round nut
(26) Diamond annular cutter
(27) Cover for cutting
(28) Disc brush (dia. 22.22 mm)
(29) Disc brush (M 14)
(30) Open-ended spanner
a)
(31) Conical brush
a) Accessories shown or described are not included with the
a)
GWS 19-125 CI
3 601 G9N 0..
W 1900
W 1220
–1
min 11500
–1
min –
mm 125
M 14
mm 22
–
●
●
●
●
kg 2.3–2.6
/ II
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
product as standard. You can find the complete selection of
accessories in our accessories range.
19-125 CIE 19-125 CIST
3 601 G9P 0.. 3 601 G9S 0..
1900 1900
1220 1220
11500 7800
2800–11500
125 125
M 14 M 14
22
●
●
●
●
●
2.3–2.6 2.3–2.6
/ II
1 609 92A 5RE | (16.01.2024)
English | 23
a)
a)
19-150 CI
3 601 G9R 0..
1900
1220
9700
– –
150
M 14
22 22
– –
● ●
● ●
● ●
● ●
2.3–2.7
/ II / II