Publicité
FH-128620
PARTS DESCRIPTION
1.
Thermostat knob
2.
Air outlet
3.
Heat select switch
4.
Handle
5.
Air inlet
6.
Base
7.
Angle adjusting knob
Heat setting:
"0" position – OFF
– Ventilation
– Ventilation + low heat output
– Ventilation + high heat output
THERMOSTAT
1.
Rotate the heat select switch to choose the suitable setting --- Ventilation / Ventilation + low heat output /
Ventilation + high heat output.
2.
Turn the thermostat knob in a clockwise direction to the max position.
3.
Once the room temperature has reached the desired value, turn the thermostat knob slowly in
anti-clockwise direction until you hear a "click" sound; this is the setting temperature.
4.
The appliance will automatically maintain the setting temperature. It will switch on when the room
temperature is below the setting, and switch off if it is above the setting.
5.
Tilting Angles: turn off the appliance, loosen the two angle adjusting knobs, push or pull the main body to
adjust the angle of airflow. Tighten the knobs after adjustment.
Note: To switch off the appliance, it is recommended to turn the heat select switch to the ventilation position
and let the appliance cooling 3 minutes. After that, please turn the heat switch to "0" position and then unplug
the appliance. This can help prolong the lifespan of the appliance.
SAFETY SYSTEM
The appliance has a safety system which automatically switches the unit off when overheated. Let the
appliance cool down for about 10 minutes, it will switch on automatically.
MAINTENANCE
The fan heater only needs regular cleaning on the outside.
⚫
Before you clean the unit, turn the switch off. Remove the plug form the socket and wait until the fan
⚫
heater cools down completely.
Use a damp cloth to wipe the heater housing.
⚫
Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the
⚫
appliance.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 3000W
- 6 -
EN
Publicité
