Important - brennenstuhl BR 1211 Mode D'emploi

052009 Rauchwarnmelder BR 1211_052009 BA_Rauchwarnmelde
BR 1211
Changing / inserting batteries
Action
Removing housing To take out a battery, the
Removing the
old battery
Connect the
new battery
Insert battery
IMPORTANT: After changing the battery, a
function test should be performed.
Testing Function
There is a test button on the front of the smoke
detector. Press the test button until the alarm
sounds. It will then stop after you release the tes-
ting button.
Operating Instructions
Description
housing must be turned
counterclockwise. The housing
can then be removed and the
battery is freely accessible.
Remove the battery from the
battery compartment. Remo-
ve the battery clip from the
battery terminals.
IMPORTANT: The correct poles
of the battery must be
connected to the smoke
detector's battery clip.
Insert the connected battery in
the battery compartment.
23