Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
then the alarm incident is recorded and stored in
this detector for up to 12 hours. The stored alarm
will be indicated every 8 seconds by a simultane-
ous blinking and peeping sound. The detector's
regular function is not impeded during this time.
The memory can be erased by pressing the test
button until you hear an alarm signal.
Changing / inserting batteries
Action
Removing housing To take out a battery, the
Removing the
old battery
Connect the
new battery
Insert battery
22
Description
housing must be turned
counterclockwise. The housing
can then be removed and the
battery is freely accessible.
Remove the battery from the
battery compartment. Remo-
ve the battery clip from the
battery terminals.
IMPORTANT: The correct poles
of the battery must be
connected to the smoke
detector's battery clip.
Insert the connected battery in
the battery compartment.
BR 1211
Publicité
