Publicité
RUN light is on to show that the program is running, C1 indicates that
the oven is heating up.
The controller maintains the pre-set temperature until the Start/Stop
button is pressed and the display shows
StoP
.
If the controller is turned off without having pressed the Start/Stop button,
the program recommences automatically on restart.
If the controller is turned off in
StoP
mode turned, the temperature
required has to be re-entered.
b. Operating as a controller with ramps
b1 programming the ramps
The previous program has finished and
StoP
is displayed
If a program is running, either leave to complete, or terminate
by pressing the Start/Stop button until
StoP
is displayed.
Press the PRGM button and use the arrow keys to scroll to
a program
(cY15 to
CY01).
Press the OK button to select the program chosen.
Inputting the ramps.
A ramp is a combination of time and a temperature setting.
Use the arrow keys to adjust the entry.
01-t
= first ramp time
The screenshot shows two hours
Press OK to set.
Publicité
