Publicité
Green display shows temperature, time ...
"Run" light on: Program has started
"Run" blinking: task cannot be completed.
e.g. Kiln is not cooling as quickly as specified
C1 is lit when the kiln is heating
a.
Using as a temperature controller only:
The previous program has finished and
If a program is running, either leave to complete, or terminate
by pressing the Start/Stopp button until
Press the Start/Stopp button briefly. Set program flashes.
Scroll with the arrow keys until
The display shows SPu, , the pre-set temperature will flash.
Use the arrow keys to select the required temperature and
confirm with OK
StoP
" is displayed.
StoP
is displayed.
tHEr
flashes, confirm with OK.
Publicité
