Publicité
1. Items delivered:
Temperature controller with a temperature sensor
2. Range of application
The controller permits the operation of all kilns up to a connected load of 3.6 kW.
Programable controller with 15 firing cycles of up to 45 ramps allowing for individual setting of
heating, hold and cooling stages.
3. Specifications
Maximum temperature:
Voltage:
Thermal element:
Phase separation:
4. Caution
Due to the functioning of your kiln, heat is produced.
Please observe the safety instructions of your kiln.
Choose a place for the controller, where you can quickly
switch it off or disconnect it from the mains in the case
of an emergency.
5. Personal protective equipment
Always wear heat-resistant working gloves and protective goggles
for your personal safety when working with the kiln.
approx. 1,200 °C
230 V~/3,600 W, 16 A
160 mm NiCr-Ni with a diode plug
double-pole with a contactor
Publicité
