Klarstein ROYAL FLUSH ECO Mode D'emploi page 45

EN
OPERATION
Control panel 10046236, 10046237,10046284,10046285,10046224, 10046379
10046380, 10046604,10046605
Speed
Turn light
Control
on/off
Adjusting the
Automatic
air blowing
Turn the
delay on/
speed
appliance on/
off
off
Lift hood up/down
If you press the extract button for 2 seconds, the hood begins to lift up and
remain in the highest position available. By again pressing the key, the hood
retracts.
Important: Check that the core when moving in and out is not blocked or
obstructed. There is a risk that a container is lifted (handle, etc.) and possibly hot
contents may spill.
Adjust the power intensity
In the working mode, short press speed control button for increasing the speed by
1 level (from level 1 to 10). Long press to increase the speed to maximum level.
With the Silder, you can reduce or increase the power level. To do this, either
directly touch the desired intensity level or move back and forth on the control
panel (under the illuminated stepped bar) until you have reached the desired
intensity. The power level is displayed in the display above.
Turn of the automatic delay
Press the automatic delay button during operation. When it starts flashing, 3
minutes automatic delay is activated.
45