Télécharger Imprimer la page

Vitrifrigo VFREE PLUS VFT30 Manuel D'instructions page 19

Publicité

Warning: do not disassemble the battery!
3
• Battery charging (for reference only):
MODE 1
MODE 2
the compressor when the fridge is running).
When connect to a solar panel, please place the fridge in a cool place to dissipate heat.
The charging input power should be higher than the working power of the fridge (about
40-45W), or switch off the fridge, otherwise the battery will run out.
-> It is suggested to use 100W solar panel.
-> MAX Solar Input Voltage: 50V; MAX Solar Input Current:10A.
Note: the output of the solar panel is unstable, so it cannot power the fridge directly.
When using a solar panel, the battery should be put into the fridge.
• Discharging time (for reference only): In the low battery protection mode, the battery
can last about 4 hours after being fully charged. When the temperature of the fridge is
set between 2~8°C (ambient temperature 25°C), it can last 12 hours after the internal
temperature stabilizes. Remove or switch off the battery to prevent self-discharge when
not in use.
7. CARE AND MAINTENANCE
Cleaning:
• Switch off and unplug the device first to avoid electric shock.
4
A
B
C
D
E
MODE 1
Charge in the fridge in standby mode
A - Wall outlet AC 100~240V
(using
dedicated
time≈8h)
B - Car cigarette lighter DC 12/24V
(when the input voltage>13.5V, charging
time≈8h)
C - Solar 12~50V
Connect to the "SOLAR" port of the fridge
(When using 100W solar panel, charging
time≈5h)
MODE 2
Charge separately
D - Battery charger (optional)
Connect to the DC charging port of the
battery (Charging time≈8h)
E - Charging station (optional)
(Charging time of a single battery≈4h)
Note: It is suggested to switch off the
fridge when charging the battery
(the power supply may mainly power
adapter,
charging
ENG
19

Publicité

loading