Publicité
A15
G
install the wiring cover plate. Make sure all
wiring connections are inside the box or under
the wiring cover plate.
0 0 0 0
A17
Connect wiring from the motor to the wiring cover plate.
A19
I
secure the motor by tightening the 2 screws.
All manuals and user guides at all-guides.com
E
F
43041-01 01/31/2008
A16
0
Connect 4" duct and vent to the outside. Tape joints.
if ducting does not fit securely, an adapter may need
A18
0 0 0 0
reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
A20
Turn on the power source.
7
to be purchased.
H
Publicité
