Publicité
All manuals and user guides at all-guides.com
B20
B21
F
G
install the wiring cover plate. Make sure all wiring
Connect 4" duct and vent to the outside. Tape joints.
connections are inside the box or under the
if ducting does not fit securely, an adapter may need
wiring cover plate.
to be purchased.
B22
B22
H
H
Connect wiring from the motor to the wiring cover plate.
reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
B25
B24
I
secure the motor by tightening the 2 screws.
Turn on the power source.
10
43041-01 01/31/2008
Publicité
