Publicité
Technical Data
Wet Diamond Core Drill PLD 450 AS
Rated voltage:
Power input:
Rated current:
Order number:
Frequency:
Drilling diameter:
Spindle connection:
Degree of protection:
Net weight:
Interference suppression:
Speed
1
2
3
Available accessories:
Item
Drill rig PLB 450
Drill rig PLB 450 G
Copper rings for easy removal of the drill bit
Adapter 1 ¼" i – ½" i
Diamond drill bits Ø 60 – 450 mm
Drill bit extensions
Water tank 10 l metal
Diamond core drill PLD 450 AS with ball valve and GARDENA connector,
protective switch, operating instructions, one spanner SW 32 and one
spanner SW 41 in a cardboard box.
Application for Indented Purpose
The diamond core drill PLD 450 AS is indented for professional use and
may be used by instructed personnel only. With the appropriate wet drill
bits, the machine may be used for wet drillings only, e.g. in concrete,
stone and masonry. It may be used with a suitable diamond drill rig only.
The motor is water-cooled, i.e., the cooling water and rinsing water for the
drill bit flows through the cooling coil for the motor before it is fed to the
drill bit. When used as intended, no water will penetrate
the machine. It is also possible to drill upwards in vertical position
without taking any additional precautionary measures (overhead drilling).
Rated speed
130 rpm
290 rpm
460 rpm
Supply
50 Hz
51 - 452 mm
1 ¼" UNC
IP 55
about 25 kg
EN 55014 and EN 61000
17
400/3~ V
5200 W
8 A
0373H000
Max.
drilling diameter
452 mm
200 mm
100 mm
Order No.
0962M000
09656000
35450000
35116000
35810000
Publicité
