Publicité
TROUBLESHOOTING
Problem
The Plasmacluster Ion Generator
does not work.
FILTER
CLEAN
Flashing
UNIT
faster (red)
UNIT
Flashing (red)
UNIT
Other indication
A discontinuous noise is heard.
A clicking or ticking sound
comes from the unit.
The air fl ow decreases.
The discharged air has odor.
All manuals and user guides at all-guides.com
•
Is the Car Adapter connected properly?
Please be sure it is defi nitely connected.
•
Does not a fuse blow?
Replace with a new fuse. (See E-15)
It is over the exchange period of Plasmacluster
Ion Generating Unit.
Replace with new Plasmacluster Ion Generating
Unit. (See E-14)
Plasmacluster Ions are not released.
Press the Mode Button and restart.
Clean the electrode section of the unit. (See
E-13)
Flashing (blue)
Is the Plasmacluster Ion Generating Unit installed
correctly? (See E-13,14)
Remove the unit, fully inserted again and press
the Mode button.
Flashing (blue)
Failure
Unplug and contact the store you purchased or
Sharp Service Center.
• Clicking or ticking sounds may be audible when
the unit is generating ions.
• Dust may block the fi lter, clean the fi lter.
(See E-12)
• Wind quantity sometimes becomes strong
during operation with LOW mode, to confi rm
the condition of ion be not abnormal.
• Filter is getting dirty.
Clean the fi lter. (See E-12)
• The Plasmacluster Ion Generator releases a
small trace of ozone which may produce odor.
This is not detrimental to health.
WHAT TO DO
E-16
Publicité
