Publicité
OPERATION
Use of replacement saw chain and/or guide bar other than that
specified, or operation without the optional Kick Guard
place, may cause severe kickback resulting in serious injury.
Chain and guide bar gauge size must be identical. Use bar/chain
combinations shown in the table above.
TM
Kick Guard
(Optional)
To purchase an optional Kick Guard
the ECHO dealer nearest you, call 1-800-432-ECHO (3246) or on the web
at www.echo-usa.com. For the name of the Shindaiwa dealer nearest you,
call 1-877-986-7783 or on the web at www.shindaiwa-usa.com.
Guide Bar
(Low-kickback)
Replacement guide bars.
The following guide bars may be considered to have equivalent kickback
energy.
• Sprocket nose guide bars of the same length and nose radius, same pitch
and having the same number of teeth.
• Hard nose guide bars of the same length and nose radius as a sprocket
nose bar.
Saw Chain
(Low-kickback)
Only use saw chain designated as, "LOW-KICKBACK," that
meets ANSI B175.1 or CSA Z62.1.3. Standard when tested on the
representative sample of chainsaws below 3.8 C.I.D., and guide
bar specified.
42
TM
contact your dealer. For the name of
© 09/2022 ECHO Incorporated
CS-4920
TM
in
X7503352100
Publicité
