Publicité
IUY ASStIVIBLY:
Rotate handle base to the
Take front panel off
u ~ r l a h t ~osltion. WARN-
bv soueezlno front
HANDLE ASSEMBLY
With cord hook to back, place the body of the
Replace front panel by putting
Slide handle down
cleaner onto base (Diagram 3). Push together
the one bottom tab in the slot on
onto the body of
firmly. Insert longer screw into the front of body
the vacuum (inset). Close until it
the cleaner.
of cleaner t o secure (Diagram 3a).
snaps into place (Diagram 4).
Insert clip on tool caddy
into hole on back of
handle.
Bring tool caddy down to fit HOSE ASSEMBLY: Push back dirt window flap.
against handle. Insert both push hose onto the Align tabs on clear dirt pas-
screws at the same time to back of unit.
sage window with the slots on
secure caddy and handle sec-
the lower hose cuff. Push and
tions. Tighten screws to secure.
turn to lock into place (inset).
6
Publicité
