Publicité
26 www.aeg.com
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer
to 'SETTING AND STARTING A PRO-
GRAMME'.
• If the salt indicator is on, fill the salt
container.
7.1 Using the detergent
D
A B
A
3
0
7.2 Setting and starting a
programme
Setting mode
The appliance must be in setting
mode to:
• Start a programme.
• Set the level of the water soft-
• Activate the rinse aid dispens-
30
20
C
B
D
2 0
A
+
-
C
ener.
er when the Multitab function
is on.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree
of soil.
1.
Press the release button (B) to open
the lid (C).
Put the detergent in the compart-
2.
ment (A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent in the compartment (D).
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
Turn the programme knob until the pro-
gramme marker is aligned with a pro-
gramme on the control panel:
• If the programme duration flashes in
the display, the appliance is in setting
mode.
• If the programme duration in the dis-
play is not flashing, the appliance is
not in setting mode.
To put the appliance in setting mode,
press and hold Multitab and Delay until
the programme duration flashes in the
display and the phase indicators for the
programme come on.
Publicité
