Publicité
English
To Install Battery Pack
1. Lift and hold the battery port cover
battery port
38
.
2. Slide a battery pack
26
audible click is heard (Fig. S).
nOTE: Ensure the battery pack is fully seated and fully
latched into position.
3. Close the battery port cover
cover is fully closed before starting mower.
To Remove Battery Pack
1. Lift and hold the battery port cover
battery port
38
.
2. Depress the battery release button
battery pack
26
out of battery port.
Safety Key (Fig. T)
DANGER: Sharp moving blade. In order to prevent
accidental start‑up or unauthorized use of your
cordless mower, a removable safety key has been
incorporated into the design of your mower. The mower
will be completely disabled when the safety key has
been removed from the mower.
DANGER: Rotating blades can cause serious
injury. To prevent serious injury, turn unit off and
remove safety key and battery pack when unattended,
or when charging, cleaning, servicing, transporting,
lifting, or storing mower.
1. Insert safety key
6
into the key slot
the main handle
4
, until it is fully seated inside of the
key slot
39
as shown in Fig. T.
2. The mower is now operational.
LED Dashboard Indicators (Fig. A, U)
The LED dashboard
12
contains the state of
charge indicator, load meter indicator, temperature
indicator, handle folding indicator, blade sharpening
indicator and reset button.
State of Charge Indicator (Fig. U)
The DCMWP600 and DCMWSP650 are equipped with a
state of charge indicator. This will display the current level
of charge in the battery during use. It does not indicate tool
functionality and is subject to variation based on product
components, temperature and end-user application.
•
The state of charge indicator LEDs
indicating the percent of charge in the battery.
•
When all 5 state of charge indicator LEDs
the battery is fully charged.
•
When one state of charge indicator LED
charge is low and then it will flash when the battery
is discharged. Remove the battery and charge it.
18
19
up to expose the
into the battery port
38
19
. Ensure the battery port
19
up to expose the
27
and pull the
39
, located on
18
will illuminate,
18
illuminate,
18
illuminates,
State of Charge Indicator LED Status
LEVEL OF CHARGE
until an
Low battery shutdown
Handle Folding Indicator (Fig. U)
The handle folding indicator
single touch handle
position when the safety key
installed, and the bail handle
handle folding indicator
Touch Handle section in this manual.
Cutting Load Meter Indicator (Fig. U)
The cutting load meter indicator
yellow or red when mowing.
•
White indicates a low cutting load.
•
Yellow indicates a medium cutting load.
•
Red indicates a high cutting load. Runtime will be
reduced if there is a prolonged high load while mowing.
Overheat Indicator (Fig. U)
•
The overheat indicator
then blink when the battery or motor is overloaded
during operation.
•
The overheat indicator
blink when the module has reached a high temperature.
CHARGE INDICATOR
100% - 85%
70% - 85%
50% - 70%
25% - 50%
≤25%
White and blinking
15
will illuminate when the
1
is not engaged in the operating
6
and battery pack
8
is pulled. To clear the
15
, refer to the Raise the Single
14
will illuminate white,
13
will illuminate amber and
13
will illuminate red and then
LED COLOR
White
White
White
White
White
26
are
Publicité
