Publicité
8. Push in and turn the control knob to the "HIGH", then release control knob. If you
want a lower temperature, push in the control knob and turn counterclockwise to
the "LOW" (Figure 5).
Note: Improper operation can cause injury or property damage. If the pilot fails to
remain lit, all valves should be closed and a waiting period of at least 5 minutes
should pass before attempting to light.
If you experience any ignition problem, please consult "Troubleshooting" on page
22.
Caution: Avoid inhaling fumes emitted from the heater's first use. Smoke and odor
from the burning of oils used in manufacturing will appear. Both smoke and odor
will dissipate after approximately 30 minutes. The heater should NOT produce
thick black smoke.
Note: The burner may be noisy when initially turned on. To eliminate excessive
noise from the burner, turn the control knob to the PILOT position. Then, turn the
knob to the level of heat desired.
Note: In Normal conditions, the height of flame is 2/3 height of glass tube. Under Hi
position. The height of flame is 1/3 height of glass tube. Under Low position, the
flame is stable and bright. There should be no noise or black smoke.
Publicité
