Publicité
clockwise to a full stop. The cylinder supply system must be arranged for vapor
withdrawal. Check that the control knob on the control unit is turned off. Hold the
regulator in one hand and insert the nipple into the valve outlet. Be sure the
nipple is centered in the valve outlet. The coupling nut connects to the large
outside threads on the valve outlet. Hand-tighten the coupling nut clockwise until
it comes to a full stop. Firmly tighten by hand only.
To Disconnect: Fully close the tank valve by turning clockwise. Turn the coupling
nut counterclockwise until the regulator assembly detaches.
Do not store a spare propane gas cylinder under or near this appliance.
Never fill the cylinder beyond 80 percent full.
Place the dust cap on the cylinder valve outlet whenever the cylinder is not
in use. Only install the type of dust cap on the cylinder valve that is provided with
the cylinder valve. Other types of caps or plugs may result in leakage of propane.
Publicité
