Publicité
smaller particles.
Carbon deposits may create a fire hazard. Disassembly the reflector, unscrew
the reflector spacer, take off the screen, take down one side of protective guards.
Then take the glass tube from the heater and wash and clear. After that
assembly the glass tube and the rest of parts.
Note: In a salt-air environment (such as near an ocean), corrosion occurs more
quickly than normal.
Frequently check for corroded areas and repair them promptly.
TIP:
Use high-quality automobile wax to help maintain the appearance of your heater.
Apply to exterior surfaces from the pole down. Do not apply to emitter screen or
domes.
Storage
Between uses:
Turn the control knob OFF.
Disconnect the propane cylinder.
Store heater upright in an area sheltered from direct contact with inclement
weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover the heater to protect exterior surfaces and to help prevent build-
up in air passages.
Note: Wait until the heater is cool before covering.
During periods of extended inactivity or when transporting: Turn the control knob
to OFF.
Disconnect the propane cylinder and move to a secure, well-ventilated location
outdoors.
Store heater upright in an area sheltered from direct contact with inclement
weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover the heater to protect exterior surfaces and to help prevent build-
up in air passages.
Never leave propane cylinder exposed to direct sunlight or excessive heat.
Note: Wait until heater is cool before covering.
Service
Only a qualified service person should repair gas passages and associated
components.
Publicité
