Note: Improper operation can cause injury or property damage. If burner fails to
remain lit, all valves should be closed and a waiting period of at least 5 minutes
should pass before attempting to light.
If you experience any ignition problem, please consult "Troubleshooting" on page
18.
Caution: Avoid inhaling fumes emitted from the heater's first use. Smoke and
odor from the burning of oils used in manufacturing will appear. Both smoke and
odor will dissipate after approximately 30 minutes. The heater should NOT
produce thick black smoke.
Note: The burner may be noisy when initially turned on.
Turn the knob to the level of heat desired.
FOR YOUR SAFETY
Be careful when attempting to manually ignite this heater. Holding in the control knob
for more than 10 seconds before igniting the gas will cause a ball of flame upon